Moving A Stored Station - Audi Symphony Operating Instructions Manual

– By rotating the control knob, select CH-Nr. (Channel)
⇒ page 24, fig. 31.
– Press the control knob.
– To select the station, rotate the control knob to the left or
right.
– To save the selected station, press the control knob.
Once you have confirmed the entry of an available channel with OK,
the associated station is selected.

Moving a stored station

Requirement: A station is stored on the preset list
⇒ page 23.
– Press the control button Presets. The preset list is
displayed.
– Rotate the control knob to Move Station name and press
the control knob.
– To change the position on the preset list, rotate the
control knob to the left or the right.
– To store the station to the selected position on the preset
list, press the control knob.
Additional settings
Displaying radio text
Requirement: The FM frequency band is selected
⇒ page 20.
– Select: Function button
FM/AM
> TEXT (radio text).
Radio texts are additional information transmitted by some stations
(e.g. station name, artist or track).
Deleting memory entries
Requirement: A station is stored on the preset list
⇒ page 23.
– Select: Function button FM/AM
SETUP > Delete radio presets > Single station or All
stations.
Single station
By rotating and pressing the control knob, select Single station and
then the station to be deleted.
All stations
Select All stations by rotating and pressing the control knob.
Opening and closing Setup
– In a Radio menu, press the
main Setup menu for the radio function.
– Press the button again to close the main Setup
SETUP
menu.
The following settings are possible in Setup Sirius:
•
Station info ⇒ page 26
•
Station sort ⇒ page 26
•
Category filter ⇒ page 27
•
Receiver serial number ⇒ page 19
Listening to the radio
> control button Tuning
> function button
SETUP button to open the
25