Troubleshooting - Bissell 2280F User Manual

Troubleshooting

To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
Problem Possible causes
Battery isn't fully charged.
Vacuum
Wrong charger is being used.
won't turn on
Brush Roll is jammed.
Brush Roll
not turning Brush Roll needs to be reset.
Broken Brush Roll Belt.
Dirt Tank is full.
Dirt Tank isn't installed properly.
Foot is loose.
Vacuum
cleaner
has low
Filters need cleaning.
suction
Filters need replacing.
Clog or obstruction in foot area.
Dirt Tank is full of debris.
Visible dirt
Filter assembly is missing or
escaping installed incorrectly.
from cleaner
Dirt Tank installed incorrectly.
Wrong charger is being used.
Vacuum
won't charge
Hand vac may not be installed in
place properly.
Vacuum Brush roll stalled by debris.
won't turn on
and LED light
is solid RED
Remedies
Charge battery. Follow charging
battery instructions on page 5.
Be sure to use only the charger
supplied with your product. The label
on the detachable hand vacuum will
list which charger can be used.
Remove obstruction.
Follow instructions on page 11.
Follow instructions on page 11.
Visit www.BISSELL.com.au.
Empty Dirt Tank.
Position Dirt Tank correctly and
snap firmly into place.
Make sure foot is fully inserted into
body of unit.
Follow filter instructions on page 10.
Visit www.BISSELL.com.au.
Detach foot from main body and
examine and remove clog from brush
chamber.
Empty Dirt Tank.
Check Filter for correct installation.
Position Dirt Tank correctly and
snap firmly into place.
Use only the charger that comes with
the machine.
Remove the hand vac and install it
properly.
Clear the Brush Roll and Brush Roll
End Cap area. Follow instructions on
page 12.
www.BISSELL.com.au
11