Kenwood TK-5210G Service Manual page 64

TK-5210
Item
Panel tuning mode
6. Squelch [Concentric SW]: A
Tight 1) Adj item: [W
[Wide] Squelch (9)]
Adjust: [ *** ]
2) Adj item: [L] → [C]
→ [H]
SSG output: 12dB
SINAD level +6dB
(MOD: 1kHz/±3kHz)
[Narrow] [Concentric SW]: B
1) Adj item: [N
Squelch (9)]
Adjust: [ *** ]
2) Adj item: [L] → [C]
→ [H]
SSG output: 12dB
SINAD level +6dB
(MOD: 1kHz/±1.5kHz)
7. RSSI [Concentric SW]: A
(–120dBm) 1) Adj item: [W RSSI
[Wide] (–120)]
Adjust: [ *** ]
2) Adj item: [L] → [C]
→ [H]
SSG output:
–120dBm (0.22µV)
(MOD: 1kHz/±3kHz)
[Narrow] [Concentric SW]: B
1) Adj item: [N RSSI
(–120)]
Adjust: [ *** ]
2) Adj item: [L] → [C]
→ [H]
SSG output:
–120dBm (0.22µV)
(MOD: 1kHz/±1.5kHz)
[P25] [Concentric SW]: C
1) Adj item: [A RSSI
(–120)]
Adjust: [ *** ]
2) Adj item: [L] → [C]
→ [H]
SSG output:
–120dBm (0.22µV)
(MOD: 1kHz/±1.5kHz)
64
( G )
ADJUSTMENT
Condition
PC test mode
equipment
1) Adj item: [Squelch SSG
Tight (Wide)] AF VTVM
2) Adj item: [Frequen- Oscilloscope
cy]
[Low] → [Center] →
[High]
SSG output: 12dB
SINAD level +6dB
(MOD: 1kHz/±3kHz)
1) Adj item: [Squelch
Tight (Narrow)]
2) Adj item: [Frequen-
cy]
[Low] → [Center] →
[High]
SSG output: 12dB
SINAD level +6dB
(MOD: 1kHz/±1.5kHz)
1) Adj item: [RSSI SSG
(–120dBm) (Wide)] AF VTVM
2) Adj item: [Frequen- Oscilloscope
cy]
[Low] → [Center] →
[High]
SSG output:
–120dBm (0.22µV)
(MOD: 1kHz/±3kHz)
1) Adj item: [RSSI
(–120dBm) (Nar-
row)]
2) Adj item: [Frequen-
cy]
[Low] → [Center] →
[High]
SSG output:
–120dBm (0.22µV)
(MOD: 1kHz/±1.5kHz)
1) Adj item: [RSSI
(–120dBm) (P25)]
2) Adj item: [Frequen-
cy]
[Low] → [Center] →
[High]
SSG output:
–120dBm (0.22µV)
(MOD: 1kHz/±1.5kHz)
Measurement
Test-
Unit Terminal Unit
Panel ANT Panel
Universal
connector
Panel ANT Panel
Universal
connector
Adjustment
Specifi cations /
Parts Method
[Panel tuning mode]
After input signal
from SSG, press
[B] key to store the
adjustment value.
[PC test mode]
After input signal
from SSG, press
[Apply] button to
store the adjust-
ment value.
[Panel tuning mode]
After input signal
from SSG, press
[B] key to store the
adjustment value.
[PC test mode]
After input signal
from SSG, press
[Apply] button to
store the adjust-
ment value.
Remarks