Kenwood TK-5210G Service Manual page 56

TK-5210
Item
Panel tuning mode
7. LCD 1) Adj item: [LCD Con-
Contrast trast]
Adjust: [ *** ]
Press [B] key to
store the adjust-
ment value.
8. RTC 1) Adj item: [RTC]
Correction Adjust: [ *** ]
Transmitter Section
Item
Panel tuning mode
1. High 1) Adj item: [Hi Power]
Transmit Adjust: [ *** ]
Power 2) Adj item: [L] → [LC]
→ [C] → [CH] → [H]
Adjust: [ *** ]
PTT: ON
Press [B] key to
store the adjust-
ment value.
2. Low Trans- 1) Adj item: [Low
mit Power Power]
Adjust: [ *** ]
2) Adj item: [L] → [LC]
→ [C] → [CH] → [H]
Adjust: [ *** ]
PTT: ON
Press [B] key to
store the adjust-
ment value.
56
( G )
ADJUSTMENT
Condition
PC test mode
equipment
1) Adj item: [LCD
Contrast]
Press [OK] button
to store the adjust-
ment value.
1) Adj item: [RTC Cor-
rection]
Condition
PC test mode
equipment
1) Adj item: [High Power
Transmit Power] meter
2) Adj item: [Frequen- Ammeter
cy]
[Low] → [Low'] →
[Center] → [High']
→ [High]
PTT: Press [Trans-
mit] button.
Press [OK] button
to store the adjust-
ment value.
1) Adj item: [Low
Transmit Power]
2) Adj item: [Frequen-
cy]
[Low] → [Low'] →
[Center] → [High']
→ [High]
PTT: Press [Trans-
mit] button.
Press [OK] button
to store the adjust-
ment value.
Measurement
Test-
Unit Terminal Unit
Panel
Panel
Measurement
Test-
Unit Terminal Unit
Panel ANT Panel
Adjustment
Specifi cations /
Parts Method
[Panel Adjust the LCD
tuning contrast by looking.
mode]
[C],[D]
[PC
test
mode]
[ ],[ ]
[Orange] [Panel tuning mode]
Press [Orange] key.
After automatic
adjustment adjusted
value is displayed on
LCD.
Press [B] key to store
the adjustment value.
[PC test mode]
Press [Start] button
of "Auto Tuning".
Press [Apply] button
to store the adjust-
ment value after the
automatic adjustment
was fi nished.
Adjustment
Specifi cations /
Parts Method
[Panel 4.8W +0.2W/–0.1W
tuning 2.5A or less
mode]
[C],[D]
[PC
test
mode]
[ ],[ ]
1.0W ±0.2W
1.4A or less
Remarks
Remarks