Kenwood TK-5210G Service Manual page 10

TK-5210
9. Firmware Version Information
(K2, K3 and K7 models only)
Press and hold the [Side3] key while turning the trans-
ceiver power ON and then keep pressing and holding the
[Side3] key, the fi rmware version information appears on the
LCD.
10. Clock Adjustment Mode
(K2, K3 and K7 models only)
10-1. Flow chart of operation
[Orange] + [PTT] + Power ON
YEAR [Side2] and [Side3] keys or [C],[D] and [B] keys
[A]
[Side2] and [Side3] keys or [C],[D] and [B] keys
MONTH
[A]
[Side2] and [Side3] keys or [C],[D] and [B] keys
DAY
[A]
HOUR [Side2] and [Side3] keys or [C],[D] and [B] keys
[A]
MINUTE [Side2] and [Side3] keys or [C],[D] and [B] keys
[A]
Completion
11. Transceiver Information Mode
(K2, K3 and K7 models only)
Use this function to confirm the transceiver firmware
version.
1 Press and hold the [Side1] and [PTT] keys while turning
the transceiver power ON and then release the [PTT] key
fi rst.
2. The transceiver fi rmware version appears on the LCD.
3. To exit the transceiver information mode, turn the trans-
ceiver power OFF.
10
( G )
REALIGNMENT
Release [Orange]