Trusted Authorities; To Upload A Trusted Authority Certificate - Xerox Wireless Print Solutions Adapter User Manual

3. Click Credentials.
4. For View or Edit, click the credential that you want to modify.
5. For Create New Self-Signed Certificate, type the details requested.
6. For Expires, type the date that the self-signed certificate expires in mm/dd/yyyy format.
7. For Type, select RSA or DSA.
8. Specify a key length.
Note: The process to create a self-signed certificate can take up to 30 seconds, depending on the
length of the key.
9. Click Submit.

Trusted Authorities

One or more authority certificates are used to verify the identity of a peer. Authority certificates are used
with some wireless authentication methods. These certificates do not require a private key.
Trusted
Authorities Description
Settings
Authority SSL authority certificate.
RSA or DSA certificates are allowed.
The format of the authority certificate can be PEM or PKCS7. PEM files must start with
"-----BEGIN CERTIFICATE-----" and end with "-----END CERTIFICATE-
----". Some Certificate Authorities add comments before and/or after these lines.
Those comments must be deleted before upload.
Authority Certificate This field automatically updates, depending upon extension of the certificate entered.
Type If the field is NONE, the certificate is unsupported and will not load. If the field is
PKCS12, enter the password in the corresponding field.
Delete To delete an existing certificate authority, beside the specific authority, click Delete.

To Upload a Trusted Authority Certificate

You can upload SSL authority, RSA, or DSA certificates.
To upload a trusted authority certificate:
1. In the Web Manager, click the Administration tab.
2. Click SSL.
3. Click Trusted Authorities.
4. To locate the valid certificate, for Authority, click Browse.
®
Xerox Wireless Print Solutions Adapter
Administration Page
39
User Guide