Configuration Using The Web Manager; Accessing The Web Manager; Navigating The Web Manager - Xerox Wireless Print Solutions Adapter User Manual

Configuration Using the
Web Manager
This chapter describes how to use the Web Manager to configure the Wireless Print Solutions Adapter, the
Xerox browser-based configuration tool. The Wireless Print Solutions Adapter configuration is stored in
non-volatile memory and is retained without power. All changes take effect immediately, unless otherwise
noted.
This chapter includes:
•

Accessing the Web Manager

•

Navigating the Web Manager

Accessing the Web Manager
1. At your computer, open a Web browser.
2. In the address field, type the IP address or host name that is assigned to the Wireless Print Solutions
Adapter. Determine if the IP address was assigned manually or automatically by DHCP. For details see
Installing the Wireless Print Solutions Adapter
Note: The default IP address of the Wireless Print Solutions Adapter is 192.168.0.1.
3. Type your user name and password, or use the factory default user name of admin and password of
PASS. The Device Status web page loads.
Navigating the Web Manager
The Web Manager is an embedded Web server that allows you to manage and configure the wireless
adapter. It is comprised of five tabbed pages that contain page-specific links.
on page 16.
®
Xerox Wireless Print Solutions Adapter
4
17
User Guide