Xerox Wireless Print Solutions Adapter User Manual page 18

Configuration Using the Web Manager
A menu bar on the left side of each page provides links you can click to navigate from one page to another.
Some pages are read-only, while others allow you to change configuration settings.
Notes:
• To take effect, some configuration changes require a system reboot. For details, see
on page 41.
• Before you try to connect to the device, wait for the system reboot to complete. This process
can take up to 30 seconds.
• If a parameter changes on a page, a Submit button appears. To save the change, click the
Submit button.
• To log out of the interface, at the top of the page, click the Logout link, then close the
browser window. To log in to the interface, reopen the browser.
Web Manager
Description
Page
Status Provides product information and network settings. For details, see
page 19.
Network Provides the status of the Ethernet and WLAN interface/link and lets you configure
Wireless Print Solutions Adapter settings. For details, see
Printer Supports printing and printer management functions. For details, see
page 29.
Diagnostics Provides a page to perform various diagnostic procedures. For details, see
Page
Administration Allows you to configure date and time, discovery, HTTP, SSL, Syslog, System, user
management, and cloning functions. For details, see
18 ®
Xerox Wireless Print Solutions Adapter
User Guide
on page 33.
Status Page
Network Page on page 21.
Printer Page
Diagnostics
Administration Page on page 35.
System
on
on