Select And Start A Washing Programme - Electrolux GA45GLV220 User Manual

SELECT AND START A WASHING PROGRAMME

Starting the washing programme
without delay start
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Set the washing programme.
• The number related to the washing
programme flashes in the display.
3. If necessary, set the energy saver func-
tion.
4. Close the appliance door, the washing
programme starts automatically.
Starting the washing programme with
delay start
1. Activate the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Set the washing programme and, if nec-
essary, set the energy saver function .
4. Press the delay button again and again
until the display shows the time of the
delay start.
• The time of the delay start flashes in
the display.
• The delay indicator is on.
5. Close the appliance door, the count-
down starts automatically.
When the countdown is completed, the
washing programme starts automatically.
The opening of the appliance door in-
terrupts the countdown. When you
close the door, the countdown contin-
ues from the point of interruption.
Cancelling the delay start
If the appliance door is open, and the
countdown has not started
1. Press the delay button again and again
until the display shows the number of
the washing programme.
• The number flashes in the display.
2. Close the appliance door, the washing
programme starts automatically.
If the appliance door is closed, and the
countdown operates
1. Open the appliance door.
2. Press the delay button again and again
until the display shows the number of
the washing programme.
• The number flashes for some sec-
onds and then the time of the wash-
ing programme shows in the display.
3. Close the appliance door, the washing
programme starts automatically.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
Cancelling the washing programme
If the washing programme has not started,
you can change the selection.
To change the selection while the washing
programme operates, it is necessary to
cancel the programme.
• Press the Reset button until the display
shows two horizontal status bars.
Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
End of the washing programme
When the washing programme is comple-
ted, an intermittent acoustic signal sounds.
1. Open the appliance door.
• The end indicator is on
• The display shows a zero.
2. Deactivate the appliance.
3. For better drying results, keep the appli-
ance door ajar for some minutes.
Remove the items from the baskets
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless steel
becomes cool more quickly than the
dishes.
electrolux 59