Table of Contents
Advertisement
English, German, French, Spanish, Italiano, Portuguese, Turkish, Arabic
4.4 AV Output Setting
4.4.1 TV Type
You can set the TV type (PAL, NTSC and AUTO) by pressing VOL
If the setting value is Auto, then TV is set automatically by source program.
So, the source program is PAL, TV set PAL source program is NTSC, TV set NTSC.
In case you selected PAL mode accidentally and the TV picture rolling up and down, press remote button as follows to
recover.
Power Off -> SAT -> SIG -> Power ON
4.4.2 Aspect ratio
You can set the TV aspect ratio (4:3 for normal TV & 16:9 for wide TV) by pressing VOL ◀▶ keys.
4.4.3 Closed caption
You can set the closed caption ON/OFF.
4.5 OSD setting
You can adjust the transparency level and Banner timeout by using
5. System Setup
5.1 DATA Transfer (Receiver to Receiver)
1) Connect Null Modem RS 232 Cable (Pin #2 & #3 twisted) between master and slave receiver.
2) Leave the slave receiver power on condition all the time until completion of date transfer.
3) Hook up the master receiver to the TV and select "SW Transfer" at "User Setup" screen.
4) Select "Api Ver" or "Ch Data" by using "Vol◀" or "Vol▶" button. Then press "CH" button to start transfer. During
data transfer, processing percentage will be displayed on the screen.
Warning!
Do not disturb data transfer by touching any Remote button, RS232 Cable, IF Cable, RCA Cable etc. during
data transfer period until "Please wait for saving" message disappeared. Interruption of data transfer could damage the
receiver's Flash memory chip which makes the receiver dead and void warranty.
5.2 Factory Setting
Once the Factory setting is selected and the collect password is given by pressing 4-digit numeric keys followed by OK
key, whole parameters are changed to the value written in the factory. That is, factory setting functions your STB (Set
Top Box) the first stage. If you do not want to continue this mode, press EXIT key before you enter password.
Common password is "0000". In case selected password is forgotten, call Pansat's dealer to get factory master
◀▶
keys.
key
◀▶
21
Advertisement
Table of Contents
