Description Of Features L; Power-Up Test Sequence/Start-Up Mode L - Beltronics 950 Operating Instructions Manual

Laser Optical Sensors: collect Laser signals from in front and
7.
behind.
Audio Alert Speaker: all audible alerts and Digital Voice
8.
Messages are emitted from this location.
Power Jack: using the straight or coiled cord,
9.
bel 980 or bel 950 operate in any vehicle with a 13.8 volt dc
negative ground system (10.5 volt to 16 volt range).
Note: Model 980 is the same as Model 950 except for the
addition of these features: Signal Strength Digit, City All Mode,
X/K/Ka Band On/Off, 9 audio level settings, Travel Case,
4' straight power cord and 2 year warranty.
description of features
Power-Up Test Sequence/Start-up Mode
Each time your detector is turned on, bel 980 or bel 950
will perform a power-up test sequence based upon the Start-Up
mode selected. There are three Start-Up modes of operation
plus a Tutorial mode. Release the pwr button at your chosen
selection.
Note—Pressing pwr at any time during start-up will bypass
the sequence.
(Factory pre-set Mode)
Presents Audio and Text Messages for Laser, Ka, K, X and
Safety Warning System® (sws
status of Selectable Features is displayed:
" or "
"
"
"
"
Note: City X,City All and X/K/Ka On/off do not appear on model 950
(Modifications Mode)
Presents Audio and Text Messages for Laser,Ka,K,X and Safety
Warning System® (sws
Features as chosen by the user.Unit is ready for operation.
"; "
"; "
"; " ", "
" Unit is now ready for operation.
™ ),followed by the presentation of Selectable
™ ). After this sequence, the
, " " ; "
"; "
"; "
",
",