Description Of Features L; Power-Up Test Sequence/Start-Up Mode L - Beltronics Vector 970 Operating Instructions Manual

Laser Optical Sensors: collect Laser signals from in front and
7.
behind.
Audio Alert Speaker: all audible alerts are emitted from this
8.
location.
Power Jack: using the straight or coiled cord, vector lr
9.
operates in any vehicle with a 13.8 volt dc negative ground
system (10.5 volt to 16 volt range).
description of features
Power-Up Test Sequence/Start-up Mode
Each time your detector is turned on, vector lr will perform
a power-up test sequence based upon the Start-Up mode
selected. There are five Start-Up modes of operation plus a
Tutorial mode. Release the pwr button at your chosen selection.
Note—Pressing pwr at any time during Start-Up will bypass
the sequence.
(Factory pre-set Mode)
Presents Audio and Text Messages for Laser, Ka, K, X and Safety
Warning System® (sws
Selectable Features is displayed:
" or "
"
"
"
operation.
(Modifications Mode)
Presents Audio and Text Messages for Laser, Ka, K, X,and
Safety Warning System® followed by the presentation of
Selectable Features as chosen by the user.
(Quick-Start Mode)
Unit will bypass any form of a power-up test sequence and
will display
previously selected. Unit is ready for operation.
™ ).After this sequence, the status of
"
";
; "
"
,
" ".
or
, "
" "
Unit is now ready for
depending upon the mode
";
;