Description Of Features L Page; Power-Up Test Sequence L Page; Tutorial Mode L Page; Memory Retention Of Feature Selections L Page - Beltronics Express E926CS Operating Instructions Manual

Antenna Opening: Radar and sws
a patented diecast antenna with integrated transition to
microstrip mixer.
Laser Optical Sensors: collect Laser signals from in front and
behind.
Audio Alert Speaker: all audible alerts and Digital Voice
Messages are emitted from this location.
Power Jack:
vehicle with a 12 volt dc negative ground system (10.5 volt to
16 volt range).
Note: 916 contains the same feature set as
EXPRESS
X/K/Ka and 60
description of features
Power-Up Test Sequence
Each time your unit is turned
Safety Warning System
illumination of digits 1, 2, 3 and/or 4 indicates if Selectable
Features are engaged (see page 8). To bypass the power-up test
sequence, press the
illumination pattern other than this standard power-up test
sequence, return it to beltronics for servicing.
Tutorial Mode
The Tutorial mode allows you to become more familiar with all
audible and visual alerts. To engage this mode, press and hold
,then press
continuously through audio/visual alerts for Laser, Ka, K, X and
Guard® Alert as well as sample sws™ messages or sws™
categories (
button and your unit will be
Memory Retention of Feature Selections
Any time your unit is turned
cigarette lighter socket, all feature settings are retained in the
unit's memory. Memory retention eliminates the need to reset
your preferred feature settings each time your unit is turned
off and then back
926 and
EXPRESS
™
sws Digital Voice Messages.
® are presented.After this test sequence,
button again. If your unit presents an
when the unit is off. The unit will cycle
916). To exit tutorial mode, press the
EXPRESS
.
signals are received by
™
916 operate in any
EXPRESS
926 pictured, except for city
EXPRESS
,alerts for Laser,Ka,K,X and
and ready to receive signals.
or unplugged from the