Table of Contents
Advertisement
7.
Laser Optical Sensors: collect Laser signals from in front and
behind.
8.
Audio Alert Speaker: all audible alerts and Digital Voice
Messages are emitted from this location.
9.
Power Jack: using the enclosed power cord, EXPRESS 935
operates in any vehicle with a 12 volt
system.
DESCRIPTION OF FEATURES
Power-Up Test Sequence
Each time your detector is turned
for Laser, Ka, K, X and Safety Warning System
presented. After this sequence, the status of Selectable
Features is displayed: "SWS o n ", "SWS o f f ", "VG-2 o n ",
"VG-2 o f f ", "SWSv o i c e ", "SWSc l i c k ", "VOICEo n ",
"VOICEo FF" (see page 9). If your unit displays information
other than this standard power-up test sequence, return it to
BELTRONICS for servicing. To bypass the power-up test
sequence, press the
sequence.
Tutorial Mode
The tutorial mode allows you to become more familiar with
all audible and visual alerts. To engage this mode, press and
hold CITY, then press AUDIO while the unit is
"TUTORIAL" appears in the display followed by the audio and
corresponding Text Message for "LASER", "Ka AUDIO", "K
AUDIO", "X AUDIO","VG-2 Al e r t ," sample Radar alert (K
band signal ramping from weak to strong) and "SAFETY
WARNING SYSTEM SAMPLE ALERTS". Three sample sws
messages are then presented in the display along with the
corresponding Digital Voice Message:
Sample 1 "ACCIDENT AHEAD"
Sample 2 "HIGHWAY WORKCREW AHEAD"
Sample 3 "POLICE IN PURSUIT"
Anytime during Tutorial Mode (except Safety Warning System
5
ON
/
button during the Power up test
PWR
VOL
negative ground
DC
, audio and Text Messages
(sws
®
™
. The message
OFF
) are
™
®
Advertisement
Table of Contents
