US Robotics Wireless Nd1 Router User Manual page 68

Wireless Nd1 Router User Guide
1. Press the SecureEasySetup button on the back of your router for 1 second. The
SecureEasySetup LED on the front of your router will start blinking.
2. Initiate SecureEasySetup in the client utility for your wireless adapter.
3. The router and the wireless device will synchronise wireless security settings, and
the device will be securely connected to the router.
To connect a device to your wireless router manually:
1. Ensure that each wireless adapter that will be connected to the network is set to
infrastructure mode.
2. Set the SSID in the wireless adapter's settings to the Network name (SSID)
that is used in the router.
3. If you set wireless security on the router, ensure that the wireless security
settings for the wireless adapter match those that you set on the router. For
instruction in changing your adapter's wireless mode, see your wireless adapter's
documentation.
1 - BROADCOM, SecureEasySetup, and the SecureEasySetup logo are trademarks or
registered trademarks of Broadcom Corporation in the United States and/or other
countries.
file:///G|/CSO/Documentation/Documentation%20-%20Draft...-1%20Router/User%20Guide/English/connect_wireless.html (2 of 3)9/14/2006 2:44:24 PM