US Robotics Wireless Nd1 Router User Manual page 16

Wireless Nd1 Router User Guide
Point-to-Point Tunneling (PPTP) Users
If your ISP uses a PPTP connection, you will need to perform the following additional steps to complete your
Installation procedure and create an Internet connection. If you have any questions regarding any of the
connection settings, contact your ISP.
1. In the router configuration pages, click the
Tunneling (PPTP) section.
2. Select the My ISP uses a PPTP connection checkbox.
3. If your ISP uses Point-to-Point Tunneling (PPTP), select My ISP uses a PPTP connection and enter the
Domain or IP address of your PPTP server in the Server field, and the User name and Password from
your ISP. If your ISP uses a specific authentication method, either select or deselect the appropriate
checkboxes.
4. When you are finished, click Save. The router will restart and you should then have an Internet
file:///G|/CSO/Documentation/Documentation%20-%20Dra...%20Mach-1%20Router/User%20Guide/English/install.html (9 of 10)9/14/2006 2:44:17 PM
Internet tab and scroll down to the Point-to-Point