Download Print this page
BIXOLON SPP-L310 Manual

BIXOLON SPP-L310 Manual

Wi-fi connection
Hide thumbs Also See for SPP-L310:

Advertisement

Wi-Fi Connection Manual
SPP-L310
Rev. 1.00
http://www.bixolon.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the SPP-L310 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BIXOLON SPP-L310

  • Page 1 Wi-Fi Connection Manual SPP-L310 Rev. 1.00 http://www.bixolon.com...
  • Page 2: Table Of Contents

    Wi-Fi Connection Manual ■ Table of Contents 1. Manual Information ......................3 2. Precautions ........................3 3. How to Connect......................4 3-1 Android Soft AP mode (default) .................. 6 3-2 iOS Soft AP mode (default) ..................7 3-3 How to change infrastructure mode ................8 4.
  • Page 3: Manual Information

    Wi-Fi Connection Manual 1. Manual Information This WLAN manual provides information on the connection of wireless network with the mobile printer. 2. Precautions 2-1 The printer has to be within 100m(Out door) from AP(Access point) to connect WLAN. Although 35m is able to communicate in door, WLAN could be affected by environment to be shorten.
  • Page 4: How To Connect

    Wi-Fi Connection Manual 3. How to Connect WLAN can be configured through the printer’s WLAN interface. Likewise, WLAN can also be configured though the printer’s Serial/USB interfaces. (1) Connecting Printer 1) Serial / USB cable Connect Serial/USB cable to Printer, PC device. When Serial cable use, baudrate between Device and printer should be the same.
  • Page 5 Wi-Fi Connection Manual (2) Checking Network Setting Self-test Power FEED While the printer is turned off, turn on the printer while pressing the feed button. The printer setting values will then be printed. - 5 - Rev. 1.00...
  • Page 6: Android Soft Ap Mode (Default)

    Wi-Fi Connection Manual 3-1 Android Soft AP mode (default) 1) Select “Wi-Fi”. 2) Select the printer to connect 3) Select “CONNECT”. 4) Wi-Fi communication is available - 6 - Rev. 1.00...
  • Page 7: Ios Soft Ap Mode (Default)

    Wi-Fi Connection Manual 3-2 iOS Soft AP mode (default) 1) Select “Wi-Fi”. 2) Wi-Fi ON and Select the printer to connect 3) Wi-Fi communication is available - 7 - Rev. 1.00...
  • Page 8: How To Change Infrastructure Mode

    Wi-Fi Connection Manual 3-3 How to change infrastructure mode 1) Enter the IP address of the printer in the address bar, and the following login window will pop up. Enter the ID and Password set for the printer, and then click [LOG IN] (Default User Name: admin, Password: password) 2) Select “Wireless”...
  • Page 9 Wi-Fi Connection Manual 3) Select “infrastructure”, and set SSID, WLAN Security Type. 4) Reboot the Printer. - 9 - Rev. 1.00...
  • Page 10: Factory Reset

    Wi-Fi Connection Manual 4. Factory Reset This function changes the WLAN settings of the printer to the initial factory settings. Method Open the paper cover, press the FEED button, press the printer power button to turn on the printer, and close the cover when a beep sounds. “Hexadecimal Dump”...
  • Page 11 It is strictly prohibited to copy, store, and transmit the whole or any part of the manual and any property of the product without the prior written approval of BIXOLON Co., Ltd. The information contained herein is designed only for use with this BIXOLON product.
Save PDF