Table of Contents
Advertisement
How to Perform a Rescue
Step 7: Prepare the AED for the next rescue
After transferring the patient to EMS personnel, prepare the AED for
the next rescue:
1.
Retrieve the rescue data stored in the internal memory of the
AED.
2.
Use Rescuelink software installed on a PC (see the Data
Management chapter in the G3 Plus Operator and Service Manual).
3.
Connect a new pair of pads to the AED
(see
4.
Close the lid.
5.
Verify that the status indicator on the AED
handle is green.
3-10
70-00915-01 F
Pad installation
on page 2-9).
Powerheart® AED G3 Plus 9390A and 9390E
Advertisement
Table of Contents
