Advertisement
W
iring
Rear side of Motor housing
Route Field lead wires (black and white) and Earth lead wire (transparent)
for Noise suppressor as illustrated in Figs. D-2 and D-3.
Put each lead wire into Lead wire holders.
Do not slack the lead wire from rear side of Motor housing to inside of Handle.
Fig. D-2
Lead wire holders of Motor housing
Inside of Handle for model with Controller
Route Lead wires to the inside of Pins
Pins
Controller (if used)
Put Controller lead wire
(brief sized one) with tube
in this space. (if used)
Noise suppressor
(if used)
Closed end splice
2-SD
Pick-up coil
Brush holder
Route Lead wires
between rib and wall
Fig. D-3
Lead wire holders of
Motor housing
Brush holder
Installation hole
for Earth lead wire
Put LED lead wire into
lead wire holder.
Terminal
black (if used)
Field lead wire (black)
Field lead wires (black)
Earth lead wire
(transparent): if used
Put the slack of LED lead wire
in this space.
Switch
LED (if used)
Route Lead wire
between boss and wall.
Field lead wire (white)
P 13 / 14
Field lead wire
(white)
Advertisement
