Download  Print this page

Makita 4350T Instruction Manual

Hide thumbs

Advertisement

INSTRUCTION MANUAL
Jig Saw
4350T
4350CT
4350FCT
O
008003
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1

Advertisement

loading

  Summary of Contents for Makita 4350T

  • Page 1 INSTRUCTION MANUAL Jig Saw 4350T 4350CT 4350FCT 008003 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
  • Page 2: Specifications

    ENGLISH SPECIFICATIONS Model 4350T 4350CT 4350FCT Length of stroke 26 mm 26 mm 26 mm Wood 135 mm 135 mm 135 mm Max. cutting capacities Steel 10 mm 10 mm 10 mm Aluminum 20 mm 20 mm 20 mm Strokes per minute (min...
  • Page 3: Specific Safety Rules

    Do not abuse the cord. Never use the cord for 18. Do not use the power tool if the switch does carrying, pulling or unplugging the power tool. not turn it on and off. Any power tool that cannot Keep cord away from heat, oil, sharp edges or be controlled with the switch is dangerous and moving parts.
  • Page 4: Functional Description

    Use clamps or another practical way to secure Selecting the cutting action and support the workpiece to a stable platform. 1. Cutting action Holding the work by hand or against your body changing lever leaves it unstable and may lead to loss of control. Always use safety glasses or goggles.
  • Page 5 To stop the tool from the locked position, pull the switch NOTE: trigger fully, then release it. Use a dry cloth to wipe the dirt off the lens of lamp. • Speed adjusting dial Be careful not to scratch the lens of lamp, or it may For 4350CT, 4350FCT lower the illumination.
  • Page 6: Bevel Cutting

    Return the tool opener to its original position. 1. Cutting line After installing, always make sure that the blade is 2. Base securely held in place by trying to pull it out. CAUTION: Do not open the tool opener excessively, or it may •...
  • Page 7: Metal Cutting

    You need not bore a starting hole or make a lead-in 1. Graduation cut if you carefully do as follows. 2. Bevel slot Tilt the tool up on the front edge of the base 3. Base with the blade point positioned just above the 4.
  • Page 8 The dust nozzle can be installed on either left or right Circular cuts side of the base. Then connect a Makita vacuum cleaner to the dust nozzle. 1. Dust nozzle 2. Hose for...
  • Page 9: Anti-Splintering Device

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Jig saw blades • 008027 Hex wrench 4 • Rip fence (guide rule) set Use the cover plate when cutting decorative veneers, •...
  • Page 12 Makita Corporation 884715A5...

This manual is also suitable for:

4350fct4350ct