Cisco ASA 5505 Getting Started Manual page 57

Chapter 6 Scenario: DMZ Configuration
f.
g.
h.
78-17612-01
From the Interfaces drop-down list, choose DMZ.
To create a new IP pool, enter a unique Pool ID. In this scenario, the Pool ID
is 200.
In the IP Addresses to Add area, specify the range of IP addresses to be used
by the DMZ interface:
Click the Range radio button.
–
Enter the Starting IP address and Ending IP address of the range. In this
–
scenario, the range of IP addresses is 10.30.30.50–10.30.30.60.
(Optional) Enter the Netmask for the range of IP addresses.
–
Configuring the Security Appliance for a DMZ Deployment
Cisco ASA 5505 Getting Started Guide
6-9