Cisco ASA 5505 Getting Started Manual page 56

Configuring the Security Appliance for a DMZ Deployment
To configure a pool of IP addresses that can be used for network address
translation, perform the following steps:
In the ASDM window, click the Configuration tool.
Step 1
c.
d.
e.
Note
Cisco ASA 5505 Getting Started Guide
6-8
In the Features pane, click NAT.
The NAT Configuration screen appears.
In the right pane, click the Global Pools tab.
Click Add to create a new global pool for the DMZ interface.
The Add Global Address Pool dialog box appears.
For most configurations, IP pools are added to the less secure, or public,
interfaces.
Chapter 6 Scenario: DMZ Configuration
78-17612-01