Installing A Cable Lock - Cisco ASA 5505 Getting Started Manual

Optional Procedures
Step 1
Step 2
Step 3
Step 4

Installing a Cable Lock

Cisco ASA 5505 Getting Started Guide
3-8
Figure 3-3 Connecting to the Console
Cisco ASA SSC-05
POWER
48
VDC
7
POWER over ETHERNET 6
1 Console port
To connect a console for local, command-line administrative access, perform the
following steps:
Plug one end of the PC terminal adapter into a standard 9-pin PC serial port on your
PC.
Plug one end of the blue console cable into the PC terminal adapter.
Plug the other end of the blue console cable into the CONSOLE port.
Configure the PC terminal emulation software or terminal for 9600 baud, 8 data
bits, no parity, and 1 stop bit.
The ASA 5505 includes a slot that accepts standard desktop cable locks to provide
physical security for small portable equipment, such as a laptop computer. The
cable lock is not included.
Security
Services
Card Slot
Status
5 4 3 2 1
2 Console cable
Chapter 3 Installing the ASA 5505
CONSOLE
2
RESET
1
0
1
2
78-17612-01