About The Adaptive Security Device Manager; C H A P T E R 4 Configuring The Adaptive Security Appliance - Cisco ASA 5505 Getting Started Manual

Chapter 4 Configuring the Adaptive Security Appliance

About the Adaptive Security Device Manager

By default, the adaptive security appliance Inside interface is configured with a
default DHCP address pool. This configuration enables a client on the inside network
to obtain a DHCP address from the adaptive security appliance to connect to the
appliance. Administrators can then configure and manage the adaptive security
appliance using ASDM.
All configuration changes can be made by using ASDM or by using the CLI.
For more information about CLI configuration, see ASA 5500 Series
Command-Line Configuration Guide
About the Adaptive Security Device Manager
Cisco ASA 5505 Getting Started Guide
4-2
78-17612-01