Cisco ASA 5505 Getting Started Manual page 36

Using the Startup Wizard
From the Wizards menu, choose Startup Wizard.
Step 5
Follow the instructions in the Startup Wizard to set up your adaptive security
Step 6
appliance.
For information about any field in the Startup Wizard, click Help at the bottom
of the window.
Based on your network security policy, you should also consider configuring the
Note
adaptive security appliance to deny all ICMP traffic through the outside interface
or any other interface that is necessary. You can configure this access control
policy using the icmp command. For more information about the icmp command,
see the
Cisco ASA 5505 Getting Started Guide
4-6
Cisco Security Appliance Command
Chapter 4 Configuring the Adaptive Security Appliance
Reference.
78-17612-01