Siemens SINUMERIK 840D pl Manual page 57

# 'Main' server configuration
#
# The directives in this section set up the values used by the
'main'
# server, which responds to any requests that are not handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers defined later in the file.
#
# All of these directives may appear inside <VirtualHost>
containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: The address where problems with the server should be
# e-mailed. This address appears on some server-generated pages,
such
# as error documents. e.g. admin@your-domain.com
#
#ServerAdmin you@example.com
#
# ServerName gives the name and port that the server uses to identify
itself.
# This can often be determined automatically, but we recommend you
specify
# it explicitly to prevent problems during startup.
#
# If your host does not have a registered DNS name, enter its IP
address here.
#
#ServerName www.example.com:80
ServerName localhost
#
# Deny access to the entirety of your server filesystem. You must
# explicitly permit access to Web content directories in other
#
<Directory />
AllowOverride none
Require all denied
</Directory>
Manage MyMachines /Remote - installation in existing control environments
Application examples, 10/2018, A5E45211403B AB
Installation/configuration
4.5 SIMATIC IoT2040
57