Siemens SINUMERIK 840D pl Manual page 56

Installation/configuration
4.5 SIMATIC IoT2040
#LoadModule lbmethod_byrequests_module modules/
#mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/
#mod_lbmethod_bytraffic.so
#LoadModule lbmethod_bybusyness_module modules/
#mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module modules/
#mod_lbmethod_heartbeat.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule status_module modules/mod_status.so
#LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule info_module modules/mod_info.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/
mod_vhost_alias.so
#LoadModule negotiation_module modules/
#mod_negotiation.so
#LoadModule dir_module modules/mod_dir.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd
as.
# It is usually good practice to create a dedicated user and group
for
# running httpd, as with most system services.
#
User daemon
Group daemon
</IfModule>
56
Manage MyMachines /Remote - installation in existing control environments
Application examples, 10/2018, A5E45211403B AB