Safety; Use; Intended Use - SKF Matrix Series Installation, Operation And Maintenance Manual

2 Safety

This paragraph provides an overview of all important safety aspects
for optimal protection of personnel as well as safe and trouble-free
operation.
Disregarding this Manual and safety regulations specified therein
may result in considerable danger and possible serious injury or
death.

2.1 Use

2.1.1 Intended use

The device has been designed and built exclusively for its intended
purpose as described in these instructions.
The device is only used for the dynamic centric compression
or tensile-loaded lift. It is only intended for interior use and is
implemented in medical devices as well as in industrial and
construction technology.
W A R N I N G
Risk from misuse
Any utilization of this device beyond its intended purpose may
lead to potentially hazardous situations.
Therefore:
• Strictly adhere to all safety precautions and instructions in this
operating manual.
• Do not make this device subject to weather conditions, strong
UV rays, corrosive or explosive air media as well as other
aggressive media.
• Do not modify, retool or change the structural design or
individual components of the actuator.
• Never use the device outside of the technical application and
operational limits.
range of environmental conditions:
• Ambient temperature: 0 °C to + 40 °C
• Relative humidity : 5% to 85%
• atmospheric pressure: 700 hPa to 1060 hPa
2.1.1.1 Product life time
the linear actuators MAX are designed for a service life of 10 years
or 10 000 double strokes at a stroke length of 200 mm.
8