T-Rail Bracket - Watchguard AP420 Hardware Manual

T-rail Bracket

Use the included mounting bracket to install the AP420 on a ceiling with a T-rail (15/16", 24mm). An optional
bracket for T-rail ceilings (9/16", 15mm) is also available from WatchGuard (Part #: WG8026).
1. Attach the bracket to the T-rail and rotate the bracket so that it snaps on the T-rail. The bracket must
be parallel to the T-rail.
2. To mount the AP420 on the bracket, place the first mounting post on the rear-side of the device on to
the lower notch of the bracket.
3. Rotate the device so that the center mounting post fits in to the center notch on the bracket.
Hardware Guide
Hardware Specifications
9