Table of Contents
Advertisement
Message Area
The display screen's message area can display the following:
Airway Pressure and Pleth Waveform Plots -- Under normal operation (as in the example
•
above), the message area displays plots for airway pressure and, when the pulse oximeter is
connected, the Pleth waveform. When a plot is necessary to facilitate a parameter
adjustment, the message area displays both the plot and the parameter's context menu.
Menus -- Displays the Menu after you press the Menu button on the ventilator's control
•
panel, or displays a parameter's context menu (which appears after you press and hold the
associated parameter button on the control panel).
Alarms -- When an alarms occur, the message area displays Smart Help™ messages that
•
identify the alarms and describe possible causes and actions that you can take in response.
Popup Windows -- Display information that assists you when adjusting parameter values.
•
Parameter Windows
Each parameter window displays its primary parameter and associated secondary parameters,
that can include, associated parameters and alarm limits.
Two types of values appear in a parameter window.
Solid text is used for primary and secondary parameter values you can adjust.
•
Outlined text is used for patient-dependant measured values.
•
Chapter 4, "Using the Z Vent Ventilator" contains more information and instructions for
adjusting parameter values.
Shared Icon Area
Directly below the message area, the device displays icons that indicate
The ventilator's power source (operating on external power or its battery)
•
The battery charging status
•
An oxygen supply is attached
•
Alarms are muted or audible
•
Auxiliary Parameter Boxes
Some parameters have values that the ventilator displays in the parameter boxes at the bottom
of the display screen. You can adjust these values using the parameter's context menu.
9650-002360-01 Rev. A
ZOLL Z Vent Ventilator Operator's Guide
Product Overview
2-5
Advertisement
Table of Contents
