Table of Contents
Advertisement
Troubleshooting
You can quickly address common problems by following the Smart Help instructions. Should
the device fail to operate properly, verify the integrity of all accessories, ventilator circuits, and
fitting connections. Check all control panel settings and follow the alarm mitigation
instructions provided in the Smart Help message(s).
Verify that the Fresh Gas/Emergency Air Intake disk filter and foam filter are not clogged or
dirty. Check for operating power from the internal battery and external power sources.
If the actions above do not resolve an operating problem, service is required. Note the service
code number(s) and contact the closest authorized ZOLL Service Center or the ZOLL
Customer Service Department (techsupport@zoll.com).
9650-002360-01 Rev. A
ZOLL Z Vent Ventilator Operator's Guide
Maintenance
7-9
Advertisement
Table of Contents
