Prerequisite 3 - Define Block Lists - NetComm NF18ACV Setup Manual

6 Click on Apply/Save when complete.
Prerequisite 3 – Define block lists
This step is not required if you plan to only use the Internet Blackout method of access restriction.
Block Lists must be defined for use in Scheduled Blocking and Permanent (Category) Blocking methods.
1 From the Parental Control start page go to the Block lists section and click the plus
current services or URL addresses in the Block List.
2 To add more destinations, or to create a new list, click the Modify button.
3 Enter the relevant Keyword or URL address in the field and click the Add button.
4 Click on the Red cross icon to remove a destination.
Note – The number of block lists is limited to the eight displayed in the Block lists section.
NF18ACV NC2 FAQs – Parental Control Setup Guide
FQ01103 v. 1.1 March 2019
button to display the
4 of 10
© NetComm Wireless 2019