Basic Operation; Initial Power Up; Preset Mode - Musicom Lab EFX-ME Owner's Manual

2. Basic Operation

2.1 Initial Power Up

• Line 1 - e to j indicate the serial number of your unit.
• Line 1 - m to p indicate the firmware version of your unit.
• Line 2 - a to p indicate the operating mode (PRESET, SONG or SET01 to SET40).
The EFX-ME requires a DC9V power supply.
When you power up the EFX-ME, the LCD display will show the serial number, firmware. And then the first preset of
BANK 01(or SONG 01) is selected.

2.2 Preset Mode

• Line 1 and 2 - a to d indicate a bank number.
• Line 1 - e to p indicate a preset title.
• Line 2 - e indicates a preset number(1 to 4) within the bank.
• Line 2 - g to p indicate the on/off status of loops, function switches and Global MIDI CCs.
The EFX-ME has 360 presets and 1 global preset that you can choose from, and they're arranged in banks of three or
four. When the EFX-ME powers up, it selects Bank 1 and Preset 1.
▼ ▲
switch to shift other banks, pressing one of the three or four switches (1 – 3 or
Press/hold MODE/BANK or BANK
4) selects a preset in the new bank.
① Press/hold the MODE/BANK ▼ ▲
or BANK
switch to scroll through the 90 available banks.
② The LEDs above 1 - 4 switches will blink in blue.
③ The preset is selected via pressing any switches from 1 through 4.
④ The LEDs above 1 - 4 switches will stop blinking and the LED above the switch will be turned on in blue.
▼ ▲
For example: to select the second preset of bank 3, press the MODE/BANK or BANK switch until the bank number
03 is shown on the display. And then press the 2 switch.
The GLOBAL PRESET is a preset with all the capabilities of preset 1 through 4, but is the same for all banks.
Pressing the switch of a preset that is already on selects the global preset and will cause the LED above the switch to
be turned off. To enable/disable the Global Preset, refer to the GLOBAL PRESET on the page 21 of the manual.
7
EFX - ME Audio Controller Owner's Manual