Bpm Display; Global Preset; Spill-Over - Musicom Lab EFX-ME Owner's Manual

4.4.8 BPM DISPLAY

This sub-menu allows determining whether BMP is displayed on the LCD display in Preset or IA mode.
1 & 2
3 & 4
▼
STORE (MODE/BANK )
▲
EXIT (BANK )
Note
When this menu is ON or the 4/TAP switch is activated as tap-tempo, the LCD display will show BPM.

4.4.9 GLOBAL PRESET

This sub-menu allows determining whether you to use the GLOBAL PRESET or not.
1 & 2
3 & 4
▼
STORE (MODE/BANK )
▲
EXIT (BANK )

4.4.10 SPILL-OVER

This sub-menu allows you to assign a specific loop what is used for the SPILL-OVER function.
An assigned loop is used for spillover between presets, even with your analog delay or reverb
1 & 2
3 & 4
▼
STORE (MODE/BANK )
▲
EXIT (BANK )
EFX - ME Audio Controller Owner's Manual
• Line 2 - n to p indicate the OFF
Press to move cursor.
When the cursor is at the Line 1 - k : Moving a UTILITY menu.
When the cursor is at the Line 2 - p : Switching between OFF or ON.
Storing any changes made while in this menu.
Exiting to the UTILITY menu.
• Line 2 - h to p indicate the ENABLE or DISABLE .
Press to move cursor.
When the cursor is at the Line 1 - m : Moving a UTILITY menu.
When the cursor is at the Line 2 - p : Switching between ENABLE or DISABLE.
Storing any changes made while in this menu.
Exiting to the UTILITY menu.
• Line 2 - h to p indicate the NO ASSIGN or LOOP1 to LOOP5.
Press to move cursor.
When the cursor is at the Line 1 - j : Moving a UTILITY menu.
When the cursor is at the Line 2 - p : Selecting NO ASSIGN or LOOP1 to LOOP5.
Storing any changes made while in this menu.
Exiting to the UTILITY menu.
or ON.
21