Oki MC160MFP Maintenance Manual page 82

Oki Data CONFIDENTIAL
7.3.11 DC power supply (DCPU)
6.3.11 DC power supply (DCPU)
1. Remove the printer control board.
See P.78
2. Remove the FAX control board.
See P.80
3. Remove the MFP board.
See P.79
[2] [3]
[1]
A0HFF2C516DA
[2]
[1]
A034F2C525DA
[1]
[2]
A034F2C526DA
44292401TH Rev.1
4. Remove the screw [1].
5. Disconnect two connectors [2] (Red
and white), remove the harness from
two wire saddles [3].
6. Remove two screws [1], and remove
the main switch [2].
7. Disconnect two connectors (black)
[1].
8. Disconnect the connector [2].
9. Remove two screws [1], and remove
[2]
the plate [2].
[1]
A0HFF2C517DA
10. Remove the harness [1], and remove
[1]
the harness guide [2].
[2]
A034F2C085DA
11. Remove the screw [1], and remove
[1]
the harness band [2].
[2]
A034F2C086DA
12. Remove five screws [1] to pull out
[2]
the DC power unit assy [2].
[1]
A034F2C087DA
MAINTENANCE
81 /