Lancia Voyager 2015 Owner's Handbook Manual page 216

NUMERIC KEYPAD MENU
When the display for either Channel 1
or Channel 2 shows DIRECT TUNE,
pushing the remote control's OK but-
ton activates a numeric keypad menu.
This screen makes it easy to enter a
specific tuner frequency, or track
number. To enter the desired digit:
1. Push the remote control's naviga-
tion buttons (▲, ▼, ►, ◄) to navi-
gate to the desired digit.
2. When the digit is highlighted,
push the remote
ENTER/OK button to select the digit.
Repeat these steps until all digits are
entered.
3. To delete the last digit, navigate to
the Del button and push the remote
control's ENTER/OK button.
4. After all of the digits are entered,
navigate to the Go button and push
the remote control's ENTER/OK but-
ton.
210
DISC MENU
When listening to a CD Audio or CD
Data disc, pushing the remote con-
trol's POP UP/MENU button displays
a list of all commands which control
playback of the disc. Using the op-
tions you can activate or cancel Scan
play and Random play.
DISPLAY SETTINGS
When watching a video source (DVD
Video with the disc in Play mode, Aux
Video, etc.), pushing the remote con-
control's
trol's SETUP button activates the
Display Settings menu. These settings
control the appearance of the video on
the screen. The factory default set-
tings are already set for optimum
viewing, so there is no need to change
these settings under normal circum-
stances.
To change the settings, push the re-
mote control's navigation buttons (▲,
▼) to select an item, then push the
remote control's navigation buttons
(►, ◄) to change the value for the
currently selected item. To reset all
values back to the original settings,
select the Default Settings menu op-
tion and push the remote control's
ENTER/OK button.
Disc Features control the remote DVD
/ Blu-ray Disc player's (for versions/
markets, where provided) settings of
DVD being watched in the remote
player.
LISTENING TO AUDIO
WITH THE SCREEN
CLOSED
To listen to only audio portion of the
channel with the screen closed:
• Set the audio to the desired source
and channel.
• Close the video screen.
• To change the current audio mode,
push the remote control's MODE
button. This will automatically se-
lect the next available audio mode
without using the MODE/SOURCE
Select menu.
If the screen is closed and there is no
audio heard, verify that the head-
phones are turned on (the ON indica-
tor is illuminated) and the headphone