Mitsubishi MOTORS Pajero Owner's Manual page 85

Table of Contents

Advertisement

Instruments and controls
1. The display shows the number of months
and driving distance remaining until the next
inspection.
2. When the next inspection is nearly due, the
display shows "-----".
For further information, we recommend you
to consult a MITSUBISHI MOTORS Author-
ized Service Point. At this time, a spanner
mark is shown for a few seconds whenever
the ignition switch is turned from the "OFF"
position to the "ON" position.
3
3. When the vehicle is inspected at a
MITSUBISHI MOTORS Authorized Service
Point, the number of months and driving dis-
tance remaining until the next inspection will
be shown.
NOTE
l
The indicated distance decreases in steps of
100 km or (100 miles). The indicated num-
ber of months decreases in steps of one month.
l
It is possible to change the settings for the
service reminder.
3-04
For further information, we recommend you to con-
sult a MITSUBISHI MOTORS Authorized Service
Point.
Resetting the service reminder
With the ignition switch in the "OFF" position, it is
possible to reset the spanner mark (A) and "-----"
indication (B). When they have been reset, the num-
ber of months and driving distance remaining until
the next inspection are shown and the spanner
mark (A) is no longer shown every time the igni-
tion switch is turned from the "OFF" position to
the "ON" position.
OBKE12E1
1. Push the reset button (D) to view the number
of months and driving distance remaining un-
til the next inspection.
2. Give the reset button (D) a long push (at
least two seconds to make the spanner mark
(A) start flashing. (If you do not touch the re-
set button for 10 seconds while the spanner
mark is flashing, the display will revert to its
original indication.)
3. Give the reset button (D) a gentle push while
the spanner mark is flashing. The "-----" indi-
cation (B) will change to "cLEAr" (C).
4. The number of months and driving distance
remaining until the next inspection will be
shown.
CAUTION
l
Daily and periodic inspections and main-
tenance are your responsibility. Be sure
to perform them to help prevent acci-
dents and breakdowns.
NOTE
l
It is not possible to reset the "-----" indica-
tion (B) with the ignition switch in the "ON"
position.
l
When a certain distance has been driven and
a certain period has elapsed after appearance
of the "-----" indication (B), the indication is
automatically reset and the number of
months until the next periodic inspection is
shown.
l
If you accidentally reset the display, consult
a MITSUBISHI MOTORS Authorized Serv-
ice Point.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents