Mitsubishi MOTORS Pajero Owner's Manual page 110

5. Press the "SET" function button.
6. The display shown below will appear, and
the display items will return to their factory
settings.
NOTE
l If the battery terminals are disconnected, the
settings for the date and time may be erased.
If this happens, please set the date and time
again.
Adjusting the barometer
E00524400020
It is possible to adjust the barometer indication and
return it to the factory setting.
NOTE
l It is not necessary to adjust the barometer be-
cause it has been adjusted at the factory.
However, if you wish, adjust it using an accu-
rate barometer.
To adjust the barometer
1. Press the "ADJ" button to select the barome-
ter adjustment display.
OBKE12E1
Instruments and controls
2. Press the "←" or "→" function button to se-
lect the "BAROMETER ADJUST" display.
Then press the "SELECT" function button.
3. Adjust the barometer by pressing the func-
tion buttons.
3-29
3