Mitsubishi MOTORS Pajero Owner's Manual page 111

Instruments and controls
"+"- To adjust the barometer
Each gentle press of the "+" function but-
ton will increase the indicated barometer
by 2 hPa. If you continue pressing the but-
ton for about 2 seconds or longer, the in-
dication is fast-forwarded.
"-"- To adjust the barometer
Each gentle press of the "-" function but-
ton will decrease the indicated barometer
by 2 hPa. If you continue pressing the but-
ton for about 2 seconds or longer, the in-
dication is fast-forwarded.
"SET"- To set the barometer
Press the "SET" function button. The dis-
3
play will flash twice, and the new setting
will be established.
NOTE
l You can return to the previous display by
pressing the "BACK" function button.
4. After setting the barometer adjust, press the
"INFO" button to return to the information
display.
3-30
Resetting to the factory setting
1. Press the "ADJ" button to select the barome-
ter adjustment display.
Press the "←" or "→" function button to se-
lect the "BAROMETER DEFAULT" dis-
play. Then press the "SELECT" function but-
ton.
2. Press the "SET" function button. The display
will flash twice and the barometer indication
will return to the factory settings.
OBKE12E1
NOTE
l Although the barometer value is changed to
the factory setting, a barometer unit you have
selected is unchanged.
l You can return to the previous display by
pressing the "BACK" function button.
3. After setting the barometer default, press the
"INFO" button to return to the information
display.
Care of the monitor
E00519700012
If the monitor becomes covered in fingerprints or
otherwise dirty, clean it with a soft and dry cloth.
NOTE
l Don't use a wet cloth or abrasive cleaner as
this may cause damage.