4. To install the bulb, perform the removal
steps in reverse.
NOTE
l
When refitting the clips (H and I) of the cov-
er, push the pin (J).
Rear combination lamps
E01004200659
On corner side
1. Remove the screws that hold the lamp unit.
2. Slide the lamp unit out sideways to remove it.
Left side
Right side
OBKE12E1
Maintenance
3. Remove the socket and bulb assemblies by
turning them anticlockwise. Remove the
bulb by pulling it out.
3-door models
5-door models
A- Rear turn-signal lamp*
B- Stop and tail lamp*
Stop lamp*
C- Reversing lamp
4. To install the bulb, perform the removal
steps in reverse.
On bumper*
1. Remove the lens mounting screws.
8
8-27