Table of Contents
Advertisement
Do not use the product near a high-field area including a transformer
or high-current circuit, an electromagnetic-wave-emitting area
including a wireless device or radio, or an electrostatic-charged area.
Otherwise, an unwanted behavior may be detected on a detection
principle.
• Do not give an impact on the product, including a strong vibration or
fall. It may damage the product.
[2] APPLICATIONS AND FEATURES
2-1 Applications
This product, when attached to the handle of the manual
cable cutter, reacts and warns the user with light and sound
about an erroneous cut when the sheathed cable of the
commercial power (frequency: 50 Hz/60 Hz) is a live wire.
2-2 Features
• Attachable to your manual cable cutter
• Warns the live-wire status of a cable with a buzz and LED
• Detectable with gloves on
• Approx. 5 months of battery life in standby mode
• With a sensitivity control volume
2-3 Detection Mechanism
A detection takes place when a signal run triggered by a
difference of potential between the electric field of the live-wire
cable and a human body runs through the product.
NOTICE
Cable
Outlet
— 3 —
CAUTION
Product
Tool
Cutting tool and the product
Ground
Human
body
Advertisement
Table of Contents
