Warning Instructions For Safe Use - Sanwa KDP10 Instruction Manual

1-2 Warning Instructions for Safe Use

Users are obliged to follow the instructions below when using
the product.
Follow the instructions below. May cause a fire or an electric shock.
• This product or a manual tool with the product attached is not
a voltage detector. Do not use the product as an alternative to a
voltage detector.
• Do not contact a metallic part of the cable cutter with an
uninsulated live part.
Follow the instructions below. May cause an electric shock.
• Do not touch the product with wet hands.
• Do not touch a superimposed voltage part during a peripheral.
• Ensure that you wear a "protective equipment" before use.
• Do not give a strong impact on the product. If the product had a
strong impact, make sure to check its operation before use. If you
cannot ensure the normal behavior, refrain from using the product.
Do not store the product under a direct sunlight, high temperature,
low temperature, humid, or dew-condensed environment. Make sure
to check the operation before using the product which had been kept
in such an environment. If you cannot ensure the normal behavior,
refrain from using the product.
Follow the instructions below. May cause an electric shock.
• Do not use the product in a way other than the one designated in
this document.
• Refrain from using the main unit, rubber rings, or the cutter which
are damaged or broken.
• Do not use the product with the case or a battery holder removed.
• Do not repair or retrofit the product, except for a battery
replacement.
Follow the instructions below. Otherwise, the product will not work
normally, causing potential and unexpected accidents.
• Use the product indoors.
• Do not use the product on a circuit beyond 600V.
• Make sure to check the product before use.
Do not leave removed button batteries unattended. Otherwise, an
accidental ingestion by an infant may arise.
DANGER
WARNING
— 2 —