Specifications - Sanwa KDP10 Instruction Manual

[8] SPECIFICATIONS

Item
Detectable voltage level
(representative value)
Target cable
Operation check
Operation indicator
Power supply
Battery life
Operating temperature/
humidity
Storage temperature/
humidity
Dimensions/weight
Accessories
Sold separately
Note that the specifications or appearance of the product described in this
document may change without prior notice due to revision, etc.
Approx. AC 60 V to 600 V exclusively for 50
Hz/60 Hz
(when attached to a 7"/8" cutter's handle)
Sheathed cable (unshielded cable)
Intermittent buzz/LED illumination
Intermittent buzz/LED illumination
LR44 (alkali-coin battery) 1.5 V × 2
Approx. 5 months (in standby mode)
0 °C to 40 °C, 80 % RH or less with no
condensation
-10 °C to 50 °C, 70 % RH or less with no
condensation
(Be sure to store the product with the batteries
removed when not in use for a long time.)
23 (H) × 77 (W) × 13 (D) mm, Approx. 13 g
(without batteries)
Rubber ring M x 2, S x2, sensitivity control
volume cover × 2 (spares), LR44 (coin
batteries) x 2, Instruction Manual
KDP 10 repair set (rubber ring M x 2, S x2,
sensitivity control volume cover x 2, battery
holder)
— 14 —
Range