Power Cables (Transceiver And Control Head); O2, O5, O7 Or O9 Control Head Power Cables; Table 2-8. Power Cables - Motorola APX 8500 Installation Manual

Standard Configurations Power Cables (Transceiver and Control Head)
2.3

Power Cables (Transceiver and Control Head)

Route the RED power cable from both the radio and the control head to the vehicle battery
compartment, using accepted industry methods and standards. Be sure to grommet the firewall hole
to protect the cable. Remove the 15-amp (part number 6580283E06), 20-amp (part number
6580283E07) or 30-amp (part number 6580283E09) fuse from the fuseholder and connect the red
lead of the radio power cable to the positive battery terminal using the hardware provided as shown
in Figure 2-43 and
DO NOT connect the black lead directly to the battery negative terminal.
2.3.1

O2, O5, O7 or O9 Control Head Power Cables

Figure 2-43. HKN6188_ Power Cable with External Speaker Connector
MN003109A01_aa
Draft
Figure 2-44. Connect the black lead to a convenient solid chassis ground point.

Table 2-8. Power Cables

Description
Mid Power Dash Mount
Mid Power Remote Mount
High Power Remote Mount
O5, O7, and O9 Remote Control
Head Power Cable - Mid Power
O5, O7, and O9 Remote Control
Head Power Cable - High Power
Part Number
HKN4191_
HKN4192_
HKN6110
HKN6188_
HKN6188_ or
HKN6188_
2-37