Multiple Control Head Installation - Motorola APX 8500 Installation Manual

Standard Configurations Radio Mounting

2.2.2.2 Multiple Control Head Installation

Control heads in a multiple control head configuration should be installed per the steps detailed in
Section 2.2.2.1: "Remote Mount Control Head Installation"
the two CAN connectors on the transceiver, see
"daisy chain" configuration from a single transceiver CAN connector. See
NOTE: The transceiver must be configured for Multiple Control Head through CPS programming.
Navigate to the "Control Head" tab in the Radio Wide section of CPS, and select "Help" for
further information and tutorials.
J300R
J300L
Control Head 1
Figure 2-32. Multiple Control Heads Parallel Configurations - Mid Power
MN003109A01_aa
Draft
J300R J300L
Control Head 3
FUSE
J200
J300R
Control Head 2
. Two heads can be connected to each of
Figure 2-32. Control heads can also be connected a
Figure 2-34
FUSE
J200
J300R
Control Head 4
FUSE
J200
2-29
for examples.
FUSE
J200
RED LEAD
) + (
) ( -
BATTERY