ironLogic Z-5R Web User Manual page 6

Z-5R Web
Indicators Purpose Table:
Designation
WIFI
USB
LINK/ACT
MODE
STATUS
CONN
OPER
4. CONFIGURATION
Important:
When configuring Z-5R WEB controller, note that it actually consists of two functional modules:
an ACS controller itself, and a network connection module.
The network connection module allows for:
1) Controller connection to the on-site LAN, via any of the following interfaces: Ethernet, Wi-Fi or
USB modem.
2) Connection to PC running the ACS control software, to manage access control functions
(loading card database, access control management, downloading event logs from buffer etc.)
There are three modes of control software connection:
· Web connection mode. The connection module connects to a control Web server on the
Internet, and the controller is managed via an internal Web site. Example: "cloud" ACS at
www.guardsaas.com
Colour Purpose
Blue Wi-Fi connection status:
Solid ON – Wi-Fi network connected.
Blinking ON – data transfer in progress.
Green USB status:
Solid ON – USB device connected.
Blinking ON – data transfer in progress.
Green Ethernet connection status:
Solid ON – Ethernet physical connection between Z-5R WEB
and the device on the other cable end (usually a switch).
Blinking – Ethernet packets being received.
Yellow Control software link status:
Solid ON – TCP link with control software established.
Red External events:
Flashes – sensor(s) state changed (door, tamper protection,
button and emergency unlock), or key code acquisition.
Green Connection module status:
Blinking rapidly – connection module not powered.
Blinking slowly – connection module booting up.
Solid ON – connection module active.
Yellow Requests from control software:
Flashes – the controller is receiving requests from the control
software.
.
Internet
Internet
www.ironlogic.me
DB
Internet
page 6