SEW-Eurodrive CMP40 Revision
Synchronous servomotors
Hide thumbs
Also See for CMP40:
- Operating instructions manual (120 pages) ,
- Addendum to operating instructions (28 pages) ,
- Addendum to the operating instructions (28 pages)
Related Manuals for SEW-Eurodrive CMP40
Summary of Contents for SEW-Eurodrive CMP40
- Page 1 Drive Technology \ Drive Automation \ System Integration \ Services Revision Synchronous Servomotors CMP40 – CMP100 CMPZ71 – CMPZ100 Edition 07/2010 19352816 / EN...
- Page 2 0.15 – 0.6 mm. If the working air gap exceeds 0.6 mm, the brake will have to be replaced. The working air gap cannot be adjusted. Revision of the Operating Instructions – Synchronous Servomotors CMP40 - 100, CMPZ71 - 100...
- Page 3 4. Release and apply the brake electrically. When doing so, measure the stroke ∆H of the pressure plate at the studs. This stroke ∆H corresponds to the working air gap. ΔH 4386101131 Revision of the Operating Instructions – Synchronous Servomotors CMP40 - 100, CMPZ71 - 100...
- Page 4 8. Close the two boreholes with new closing caps [1]. The following table shows the part numbers for the replacement closing caps: Brake sizes Part number BY2, BY4 1328 148 8 1322 534 0 4386103563 Revision of the Operating Instructions – Synchronous Servomotors CMP40 - 100, CMPZ71 - 100...
Need help?
Do you have a question about the CMP40 and is the answer not in the manual?
Questions and answers