Subscribe to Our Youtube Channel
Related Manuals for SEW-Eurodrive CMDV55
Summary of Contents for SEW-Eurodrive CMDV55
- Page 1 *21929181_0315* Drive Technology \ Drive Automation \ System Integration \ Services Revision Synchronous Compact Servomotors CMDV55 – CMDV162 Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com...
- Page 2 Revision INFORMATION The revision at hand provides information/changes in addition to the already available "Synchronous Compact Servomotors CMDV55 – CMDV162" operating instructions. Markings The following table lists all marks that can occur on a nameplate or on the motor and an explanation of what they mean.
- Page 3 Revision Technical data of the BP brake Technical data of the BP brake Motor Brake 2, 20 °C 4, 100 °C 1m, 100 °C insp type CMDV55 BP01 0.95 CMDV70 BP04 CMDV93 BP09 10.0 CMDV138 26.4 18.6 12.4 14.4 CMDV162 43.2...
- Page 4 Revision Maximum permitted number of switching cycles Maximum permitted number of switching cycles Motor Brake Permitted number of switching cycles CMDV55 BP01 150000 CMDV70 BP04 1000000 CMDV93 BP09 1500000 CMDV138 2500000 CMDV162 1500000 Revision – Synchronous Compact Servomotors Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com...
- Page 5 Revision BP brake project planning BP brake project planning 1.4.1 Data for brake dimensioning The data of the application must be known for projecting a brake. The abbreviations used for project planning are summarized in the following table: Designation Meaning Unit η...
- Page 6 Revision BP brake project planning 1.4.2 Hold function The selected braking torque M must at least be higher than the highest static 4, 100 °C load torque of the application. > 4 100 ° The following table shows the number of permitted switching cycles of the BP brake until end of service life when used exclusively as holding brake.
- Page 7 Revision BP brake project planning 1.4.5 Working capacity in case of emergency switching off Braking work per braking cycle in case of emergency switching off: m,EmergencyStop 1m,100 C 182.4 – M , , 100 C Observe the sign of the highest static load torque M in the formula.
Need help?
Do you have a question about the CMDV55 and is the answer not in the manual?
Questions and answers