Extender Kit Installation - Tripp Lite B126-1P1M-U-POC Owner's Manual

Extender Kit Installation

Notes:
1. Test to make sure the entire installation works properly before pulling cables through
ceilings/walls.
2. To achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6/6a
cable. Using stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling. All
Tripp Lite N202-Series Cat6 cables are made of 24 AWG solid wire cabling.
1. Make sure the HDMI source is powered OFF.
2. Connect the transmitter unit's built-in HDMI connector to the HDMI
source.
3. Optional: Connect a local monitor to the LOCAL port on the transmitter
unit.
4. Use the included USB Micro-B cable to connect the transmitter unit to a
USB wall charger or a USB port from the source.
17-01-160-9336A1.indb 3
Blu-ray™ PLAYER
OPTIONAL LOCAL DISPLAY
USB Power
(to source or USB wall charger)
Up to 50 ft.
at 1080p (60Hz)
Up to 100 ft.
at 1080i
3
1080p DISPLAY
2/22/2017 2:52:48 PM