Extender Kit Installation - Tripp Lite B126-2P2M-POC Owner's Manual

Extender Kit Installation

Notes:
1. Test to make sure the entire installation works properly before pulling cables through
ceilings/walls.
2. To achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6/6a
cable. Using stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling. All
Tripp Lite N202-Series Cat6 cables are made of 24 AWG solid wire cabling.
1. Make sure the HDMI source is powered OFF.
2. Using a Tripp Lite P568-Series HDMI cable, connect the HDMI source to
the transmitter unit's INPUT port.
3. Connect the external power supply to the transmitter unit and plug it into
a Tripp Lite Surge Protector, Power Distribution Unit or Uninterruptible
Power Supply. The green RJ45 LEDs will illuminate to indicate power is
being received from the external power supply.
17-01-159-9336A2.indb 4
Blu-ray™ PLAYER
Up to 50 ft. at 1080p (60Hz)
Up to 100 ft. at 1080i
Up to 50 ft. at 1080p (60Hz)
Up to 100 ft. at 1080i
4
1080p DISPLAY
1080p DISPLAY
2/16/2017 8:53:35 AM